Anyone have a transmission crossmember for a 70-72 Monte with a TH350? Need one ASAP!

315-395-1973 Adam

1969 Chevy 300HP 350 and date matching TH350 with 76K miles on them. Both were built the 3rd week of November 1968. The block is a 4 bolt and the heads are 041 castings. They are still in the car and running. The engine currently has a Holley carb and aftermarket dual point distributor. I do have the correct 1969 350/AT Quadrajet carb for it, but it needs to be rebuilt. The engine also has a new fuel and water pump on it.

Great engine and trans for a stocker or a restoration. $1,200 for both.

315-395-1973 Adam

SOLD!

Nice used pair of 1 5/8" headers with 3" collectors for GM G-bodies. Brand unknown. There is no part number on them. No dents or scrapes though. $40/pr

315-395-1973 Adam

I know, Jeff. But some people just look at the top of the page. These guys aren't from the area and don't frequent the site much.

That's great news!

Someone needs to change the opening day date on the home page though. I've had a few people ask me if I'm ready for Sunday!

Hey Bryan,

I still have them. PM me your e-mail address and I'll send you some. Some of my pics aren't showing up on the site lately.

Small block Mopar 727 built with A&A and Dynamic parts with a forward manual valve body and deep pan. Was in my Valiant running 10.80's with a 360 and driven on the street as well. No issues at all, just don't need it because I switched the car to a big block.

If you need a BB 727, I have a bare BB case you could swap the internals into.

$350 for the trans or $400 with the BB case.

3153951973 Adam

26x4.5 Good Year fronts, lots of tread left SOLD!

Edelbrock 1/2" 4150 nitrous plate $50

Cold Fusion nitrous and fuel solenoids $50/pr

Holley 750 vacuum, List 3310, has secondary metering plate added, ran excellent. SOLD!

3.5" steel driveshaft, 46 9/16" long center to center with solid 1350 u-joints, installed but never used $100

TH400 cross member for 67-69 Camaro or 68-72 Nova $40

3153951973 Adam

Sorry to hear this:( He was always fun to talk to and watch race that car.

SOLD!

Get well soon, Klaus!

Adam

Still available!

OK, thanks Doug!

Nice used B&M Pro Stick with TH350 gate. I also have a C4 gate and cable bracket if you want that instead. $100

315-395-1973 Adam

Mufflers are sold.

SB Mopar 727. This was behind a street/strip 360 that went 10.80's. Dynamic forward pattern manual valve body and A&A internals. It came with my Valiant when I bought it, but I switched to a BB and can't use it. $350 FIRM.

1976 Mopar 400 block, standard bore but needs a sleeve due to rust pitting. Hot tanked, magged and sonic checked by Competition Wedge. $50

5lbs. NOS nitrous bottle with high flow valve $75

3 1/2" bullet style mufflers. Not sure what brand they are because they came on a car I bought. Body measures 18 1/2" $20/pr

One M/T racing tube, was in a 27" slick $10

3153951973 Adam

$5,000 ROLLING 315-944-5085

MAKE OFFER, HAS TO GO!!!!!!!!!

OK, thanks Tom